Padded Velvet Cushion Tutorial: A Lovely Mess – Health Guild News

0
27


It is that time of year when I want to increase the welcoming factor of my space. Whether it is flashing lights, a set of synthetic leather or super soft velvet pillows, all make these longer nights a little more magical.

Also, adding a new top pillowcase to your space is one of the fastest ways to give a little makeover to your sofa or bed. You can put it on and take it off with the seasons, but you may never want to leave that velvet pillow!

If you have access to a sewing machine and can sew a straight line, you can fill your sofa with a padded, lush velvet cushion for a little more hygiene this winter. Warning: You may want to take more naps.

Adding simple knit lines to the front of the pillow is an easy way to add a subtle pattern and add more interest to the stack.

I even added some mid-century star shapes to my brick red pillow to give it a subtle look at the holidays. You can layer them or combine them with different woven cotton or knitted wool pillows for a visual feast at the end of your sofa.

Supplies:
-2/3 yard wide pink orissa velvet fabric for 16-inch cushions and 1/2 yard for 12-inch cushions
pillow insert matching size (16-inch pillow insert for 16-inch pillow, etc.)
-sewing machine and coordinating thread
– fabric scissors
– straight needles
– plaster or marker
-acrylic ruler
cutting mat (optional)

Since they are a bit larger, I will share the process of making the golden version of the padded line cushion with a smaller sample. It measures 6 “x 6” instead of 16 “x 16”.

Regardless of the size of the pillow you want to create, cut the fabric so that it is the same size as the pillow insert. You don’t want to add an inch so that it fits or will become loose and flexible. Ask me how I know this.

Step 1: For a 16-inch pillow, cut a piece of fabric that measures 16 inches x 16 inches for the front.

Then cut two more pieces measuring 12 “x 16” for the back pieces. You want your two back pieces to overlap by at least 5 inches. For diagonal stripes on the pillow, rotate the 16-inch square piece so that the velvet side is down.

Use the acrylic ruler and cutting mat to draw straight lines as far apart as you want for your design. I suggest 1/2 ″ or 1 ″ away. Keep it consistent and it will look great!

If you want a star design, use your acrylic ruler to draw a variety of star shapes on the back. Just make sure you sew again at the beginning and end of a stitch line to prevent your stitches from unwinding.

Second step: Follow your knitting lines with your sewing machine and trim the ends when you’re done.

Step three: For each of the two back sides, fold one of the long edges down once by 1/2 “and then again 1/2”. Pin in place. Sew along the folded edge. Make sure you are folding to the wrong side so that the right side of the fabric is displayed after sewing as shown.

Four steps: Place one of your back sides on top of the front piece so that the right sides are facing each other and three of the edges are aligned as shown. Pin in place along the three edges.

Five steps: Repeat with the second back. The edges with edges should overlap a little more than my sample in the example. Pin in place.

Sew the entire perimeter of the pillow so that you are sewing the two pieces as you go. Remove the pines.

Step six: Turn the pillow to the right, remove the corners, and enter the shape of the pillow. Peel and enjoy!

I love how the light catches the velvet. It makes you want to grab a good book and get ready for the night!Are we still karate cutting our pillows? I think these didn’t have enough weight to get bitten.

Find yourself at false insertion to get an even higher range effect and everyone will ask where you bought your pillow! – Rachel

Are you looking for more DIY pillows?

DIY padded velvet cushion

An easy pillow tutorial with velvet fabric

  • 2/3 yard pink velvet fabric with wide edges for 16 “pillows and 1/2 yard for 12” pillows
  • pillow insert of equal size
    16-inch cushion insert for 16-inch cushion, etc.
  • sewing machine and coordinating thread
  • fabric scissors
  • straight needles
  • plaster or marker
  • acrylic ruler
  • cutting mat
    optional

  1. For a 16-inch pillow, cut a piece of fabric that measures 16 inches x 16 inches for the front.

    Then cut two more pieces measuring 12 “x 16” for the back pieces. You want your two back pieces to overlap by at least 5 inches. For diagonal stripes on the pillow, rotate the 16-inch square piece so that the velvet side is down.

    Use the acrylic ruler and cutting mat to draw straight lines as far apart as you want for your design. I suggest 1/2 ″ or 1 ″ away. Keep it consistent and it will look great!

    If you want a star design, use your acrylic ruler to draw a variety of star shapes on the back. Just make sure you sew again at the beginning and end of a stitch line to prevent your stitches from unwinding.

  2. Follow your knitting lines with your sewing machine and trim the ends when you’re done.

  3. For each of the two back sides, fold one of the long edges down once by 1/2 “and then again 1/2”. Pin in place. Sew along the folded edge. Make sure you are folding to the wrong side so that the right side of the fabric is displayed after sewing as shown.

  4. Place one of your back sides on top of the front piece so that the right sides are facing each other and three of the edges are aligned as shown. Pin in place along the three edges.

  5. Repeat with the second back. The edges with edges should overlap a little more than my sample in the example. Pin in place.

    Sew the entire perimeter of the pillow so that you are sewing the two pieces as you go. Remove the pines.

  6. Turn the pillow to the right, remove the corners, and enter the shape of the pillow. Peel and enjoy!

Since they are a bit larger, I will share the process of making the golden version of the padded line cushion with a smaller sample. It measures 6 “x 6” instead of 16 “x 16”. Regardless of the size of the pillow you want to create, cut the fabric so that it is the same size as the pillow insert. You don’t want to add an inch so that it fits or will become loose and flexible.

Credits // Author and photography: Rachel Denbow.





Source link